These cameras can be viewed and
controlled from a standard Web
browser, video display, or even a
compatible cell phone or PDA.
Place them in your home, office,
vacation home or almost anywhere
else that you'd like to keep an eye
on things, with no PC required on
location! They are easy to install
and operate and require no
additional software for the PC that
you're viewing them on. Each camera
also comes with a free Web address,
which can track the camera
automatically. All you need is a
regular Web browser to view them on
your PC, as all of the other
required software, including control
software (TCP/UDP) and e-mail
software (SMTP), is already inside
the camera.
This camera can communicate
wirelessly with standard 802.11b/g
wireless devices, allowing the
flexibility to install and operate
the camera without running network
wires, and utilizing SSID filtering
and powerful 64/128/152 bit WEP
encryption helps to protect your
wireless network from illegal
intrusion. Since the camera is
attached through an Ethernet
connection (or router) and power
source, you don't need a computer at
each location you want monitored.
Each camera has a built-in web
server with IP address. To view the
images on a PC, simply open a
graphics-capable Web browser and
type in the cameras specified,
password optional Internet address.
This model was designed for outdoor
operation, and meet both IPX4 and
UL6500 standards of outdoor
equipment. They operate down to -4°F
and up to 122°F, and are splash
resistant for wet-weather operation.
Use of the built-in microphone and a
separately purchased amp-equipped
speaker enables two-way voice
communication
(transceiver system) between the
network camera and a PC used to
monitor the camera image. In
addition to conventional monitoring
of images and sound, voice messages
can be transmitted from the PC to
the network camera. Voice
transmission and reception can be
switched easily from the PC used to
monitor the image.
This camera features a CCD (Charged
Couple Device) for sharp, enhanced
image expression. The image
refreshing speed (maximum) has been
increased to 30 images per second
for smoother displays of moving
images.
The BB-HCM371A features an SD Memory
Card slot for recording images
captured by the network camera
directly onto an SD Memory Card
(sold separately).
* Voices cannot be recorded.
Our cameras are attached through an
Ethernet connection (or router) and
power source, you don't need a
computer at each location you want
monitored. Each camera has a
built-in Web server with IP address.
To view the camera's images on a PC,
simply open a graphics-capable Web
browser and type in the cameras
specified Internet address (password
optional).
Using a standard Web browser, video
display, or even a compatible cell
phone or PDA, you can control the
movement of the camera. There is
120º of Pan (left & right) movement
and 65º of Tilt (up & down) movement
available. You can also assign a
"Home Position" that allows you to
return the camera to a
pre-designated shooting position. Up
to eight shooting positions can be
registered in advance, so you can
aim the camera exactly where you
want it. You can also click on the
part of the image you want to see,
and automatically bring that part to
the center of the screen.
The camera can be set to
automatically record video at
certain times and certain speeds. In
addition, with optional, external
sensors attached to the camera, it
is possible for the camera to email
or record when triggered by motion,
sound, light, timer, or even a push
button. These convenient functions
eliminate your need to constantly
check the image.
The FREE viewnetcam.com service
allows you to create a personal Web
address (e.g., http://bob.viewnetcam.com)
at which your camera's live image
can be found on the Internet. Access
your Panasonic Network Camera live
from virtually any Internet
connection point around the world!
Your Web browser is the only
software you'll need. Here's how the
camera and service works: special
software embedded within your
Panasonic Network Camera gives your
camera the ability to locate your
unique Internet address. No matter
what kind of Internet connection you
have or which Internet provider you
use, the viewnetcam.com service will
keep your camera's Internet address
permanent.
With the built-in heat sensor, the
camera can be set to record and/or
notify you by email when someone
enters the room. It can even
automatically move to a preset
location when triggered, just in
case someone was viewing a different
part of the room.
|
|
