| |
|
|
|
|
|
|
|
|
|
BB-HCM331A Professional Grade Network
Camera
Outdoor Network Camera with 2-Way Audio
Brochure |
|
|
|
|
|
- Network Camera
- Motion JPEG Format
- 2-Way Voice
Communication
- ID / Password
Authentication
- SD Memory Card Slot
|
- Pre-Alarm Image Buffer
- Low Light Capability
- Indoor - Outdoor Use
- Color: Silver
|
|
|
|
Resources, Software & Demos
|
|
|
Professional Grade
Netcam Product |
|
|
|
|
|
These cameras can be viewed and
controlled from a standard Web
browser, video display, or even
a compatible cell phone or PDA.
Place them in your home, office,
vacation home or almost anywhere
else that you'd like to keep an
eye on things, with no PC
required on location! They are
easy to install and operate and
require no additional software
for the PC that you're viewing
them on. Each camera also comes
with a free Web address, which
can track the camera
automatically. All you need is a
regular Web browser to view them
on your PC, as all of the other
required software, including
control software (TCP/UDP) and
e-mail software (SMTP), is
already inside the camera.

This model was designed for
outdoor operation, and meet both
IPX4 and UL6500 standards of
outdoor equipment. They operate
down to -4°F and up to 122°F,
and are splash resistant for
wet-weather operation.
Use of the built-in microphone
and a separately purchased
amp-equipped speaker enables
two-way voice communication
(transceiver system) between the
network camera and a PC used to
monitor the camera image. In
addition to conventional
monitoring of images and sound,
voice messages can be
transmitted from the PC to the
network camera. Voice
transmission and reception can
be switched easily from the PC
used to monitor the image.
This camera features a CCD
(Charged Couple Device) for
sharp, enhanced image
expression. The image refreshing
speed (maximum) has been
increased to 30 images per
second
for smoother displays of moving
images.
The BB-HCM331A features an SD
Memory Card slot for recording
images captured by the network
camera directly onto an SD
Memory Card (sold separately).
* Voices cannot be
recorded.
Our cameras are attached through
an Ethernet connection (or
router) and power source, you
don't need a computer at each
location you want monitored.
Each camera has a built-in Web
server with IP address. To view
the camera's images on a PC,
simply open a graphics-capable
Web browser and type in the
cameras specified Internet
address (password optional).
Using a standard Web browser,
video display, or even a
compatible cell phone or PDA,
you can control the movement of
the camera. There is 120º of Pan
(left & right) movement and 65º
of Tilt (up & down) movement
available. You can also assign a
"Home Position" that allows you
to return the camera to a
pre-designated shooting
position. Up to eight shooting
positions can be registered in
advance, so you can aim the
camera exactly where you want
it. You can also click on the
part of the image you want to
see, and automatically bring
that part to the center of the
screen.
The camera can be set to
automatically record video at
certain times and certain
speeds. In addition, with
optional, external sensors
attached to the camera, it is
possible for the camera to email
or record when triggered by
motion, sound, light, timer, or
even a push button. These
convenient functions eliminate
your need to constantly check
the image.
The FREE viewnetcam.com service
allows you to create a personal
Web address (e.g., http://bob.viewnetcam.com)
at which your camera's live
image can be found on the
Internet. Access your Panasonic
Network Camera live from
virtually any Internet
connection point around the
world! Your Web browser is the
only software you'll need.
Here's how the camera and
service works: special software
embedded within your Panasonic
Network Camera gives your camera
the ability to locate your
unique Internet address. No
matter what kind of Internet
connection you have or which
Internet provider you use, the
viewnetcam.com service will keep
your camera's Internet address
permanent.
With the built-in heat sensor,
the camera can be set to record
and/or notify you by email when
someone enters the room. It can
even automatically move to a
preset location when triggered,
just in case someone was viewing
a different part of the room.
|
|
- Connecting the camera to the
Internet requires Internet access
and may require that you obtain
additional hardware such as a
cable or DSL modem, or a hub or
router with a 10Base-T Ethernet
connection. The camera will not be
accessible from across the
Internet unless the Internet
connection is active. We cannot
guarantee that your Internet
connection will always be
available. The frame rate of the
motion image may be dependent upon
the uplink speed of the Internet
connection and other factors.
Viewing may involve some time
delay. Recommended minimum 100kbps
upstream bandwidth for camera.
- PLEASE NOTE that under certain
circumstances, audio/video
recording may be PROHIBITED by
law. This device should be used
only in compliance with all
applicable federal, state and
local statutes. This function can
be used with a PC only. It cannot
be used with a cell phone. To hear
the voice transmitted from the PC,
a commercially available speaker
with a built-in amp must be
installed. The transceiver system
does not allow simultaneous
transmission and reception of
voices. A version upgrade may be
required if you use under IPv6.
- Image resolution: 320 x 240 or
160 x 120.
- Email transmission may not be
possible in some cases due to the
mail server authentication system
(SMTP authentication, etc.) used
by your Internet service provider.
|
|
|
|
|
|
|
|
| |
|
|
Accessories for the BB-HCM331A |
|
|
|
|
|
Recording Software |
|
|
|
|
|
|
 |
BB-HNP11A
Recording and Control Software
- Network Camera Recorder
- No Limit to Registered Camera Units
- Pan / Tilt / Zoom Control
- Up To 640 x 480 Recording Resolution
- User Definable Recording Limits
- Motion Detection Record
- Timer Recording
- Hard Drive Capacity Monitor
- Continuous Playback
- Automatic Backup
System Requirements
- Windows XP Professional / Windows 2000 (Service
Pack 2 or Later)
- NTFS File System
- Intel Pentium 4 1.8GHz or Greater
- 256MB RAM or Greater
- Internet Explorer 6.0 or Later
Brochure
|
|
|
|
|
|
|
Router and Camera
Management |
|
|
|
|
|
|
 |
BB-HGW700A
VPN 802.11G Router and Camera Management System.
- Wireless Camera Management System
- Support for Multiple Security Protocols
-
IPv6
Compatible
- 1 Wan Port
- 4 LAN Ports
-
Automatic Setup w/ Network Cameras
- Up To 16 Camera Portal Page
-
Router Function
-
Color: Silver / Blue
Click Here For Product Overview (PDF File)
Brochure |
|
|
|
|
|
|
Television Viewing
|
|
|
|
|
|
|
 |
BL-WV100A
Television Adapter
- Wireless Camera Monitoring System
- Support for Multiple Security Protocols
-
Record
to SD Cards
-
TV Adaptor
- Automatic Video Signal Switching
-
Connect Up To 8 Cameras
- Audible or Visual Sensor Alarm
- 4 LAN Ports
- Color:
Silver / Black
Brochure
|
|
|
|
|
|
| |
Connecting the camera to the
Internet requires Internet access and may require that you
obtain additional hardware such as a cable or DSL modem, or a
hub or router with a 10Base-T Ethernet connection. The camera
will not be accessible from across the Internet unless the
Internet connection is active. We cannot guarantee that your
internet connection will always be available. The frame rate of
the motion image may be dependent upon the uplink speed of the
Internet connection and other factors. Viewing may involve some
time delay. Recommended minimum 100kbps upstream bandwidth for
camera. |
|

Additional information about Comvox
Systems and our products are available by calling 904-887-2183
and
http://www.ComvoxSystems.net.
 |
|