These
cameras can be viewed and controlled from a
standard Web browser, video display, or even a
compatible cell phone or PDA.
Place them in your home, office, vacation home
or almost anywhere else that you'd like to keep
an eye on things, with no PC required on
location! They are easy to install and operate
and require no additional software for the PC
that you're viewing them on. Each camera also
comes with a free Web address, which can track
the camera automatically. All you need is a
regular Web browser to view them on your PC, as
all of the other required software, including
control software (TCP/UDP) and e-mail software
(SMTP), is already inside the camera.
Use
of the built-in microphone and a separately
purchased amp-equipped speaker enables two-way
voice communication
(transceiver system) between the network camera
and a PC used to monitor the camera image. In
addition to conventional monitoring of images
and sound, voice messages can be transmitted
from the PC to the network camera. Voice
transmission and reception can be switched
easily from the PC used to monitor the
image.
The
BB-HCM311A features a CCD (Charged Couple
Device) for sharp, enhanced image expression.
The image refreshing speed (maximum) has been
increased to 30 images per second
for smoother displays of moving
images.
The
BB-HCM311A features an SD Memory Card slot for
recording images captured by the network camera
directly onto an SD Memory Card (sold
separately).
*
Voices cannot be recorded.
Our
cameras are attached through an Ethernet
connection (or router) and power source, you
don't need a computer at each location you want
monitored. Each camera has a built-in Web server
with IP address. To view the camera's images on
a PC, simply open a graphics-capable Web browser
and type in the cameras specified Internet
address (password optional).
Using
a standard Web browser, video display, or even a
compatible cell phone or PDA, you can control
the movement of the camera. There is 120º of Pan
(left & right) movement and 90º of Tilt (up
& down) movement available. You can also
assign a "Home Position" that allows you to
return the camera to a pre-designated shooting
position. Up to eight shooting positions can be
registered in advance, so you can aim the camera
exactly where you want it. You can also click on
the part of the image you want to see, and
automatically bring that part to the center of
the screen.
The
camera can be set to automatically record video
at certain times and certain speeds. In
addition, with optional, external sensors
attached to the camera, it is possible for the
camera to email
or record when triggered by motion, sound,
light, timer, or even a push button. These
convenient functions eliminate your need to
constantly check the image.
The
FREE viewnetcam.com service allows you to create
a personal Web address (e.g.,
http://bob.viewnetcam.com) at which your
camera's live image can be found on the
Internet. Access your Panasonic Network Camera
live from virtually any Internet connection
point around the world! Your Web browser is the
only software you'll need. Here's how the camera
and service works: special software embedded
within your Panasonic Network Camera gives your
camera the ability to locate your unique
Internet address. No matter what kind of
Internet connection you have or which Internet
provider you use, the viewnetcam.com service
will keep your camera's Internet address
permanent.
With
the built-in heat sensor, the camera can be set
to record and/or notify you by email when
someone enters the room. It can even
automatically move to a preset location when
triggered, just in case someone was viewing a
different part of the
room.
|
|
